Results 1 to 8 of 8

Thread: Frames

  1. #1

    Frames

    I am having problems making frames in PS CS5, can someone help me.

  2. #2
    Atria, exactly how are you trying to make the frames that's giving you problems? You can make a frame with a paper, cutting out a square or rectangle with the center cut out, then add a Bevel & Emboss style to make the edges rounded or sculpted. How deep you set the bevel, the contour you use, and the texture (if any) you add will all have an effect on the final look of the frame. It's best to try out a bunch of things, with the preview turned on, till you get a look you desire.
    A simple frame could be made by using a paper that has a wooden look:
    1. Cut 4 strips of the desired lenth and width, all going the same direction of the wood grain. They should all be the same width. The length will vary for the two pairs unless you're doing a square frame.
    2. Cut each end of each strip at a 45 degree angle so the strips will fit together with a mitred corner.
    3. Rotate one pair of strips 90 degrees and move the strips so the corners match up with no gaps.
    4. Merge the four layers together to form the frame body.
    5. Add the Bevel Style. A simple bevel might have these settings:
    Bevel.jpg resulting in this frame:frame.jpg

    To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

    To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

    To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

  3. #3
    View bombalurina59's Gallery
    Join Date
    Aug 2009
    Location
    Llandyfriog, Wales, UK
    Posts
    1,525
    Wow! This is a really cool tut, Dona! Thank you so much for sharing it!



    To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


    To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

    To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

    To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

    To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

    To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

    To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.








    To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

  4. #4
    View JanetB's Gallery
    Join Date
    Feb 2009
    Location
    Virginia, USA
    Posts
    6,296
    Oh, nicely done, Dona!!
    -- Janet --
    To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

    To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


    To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

    To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

    To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.




  5. Very nice tut! I am going to try this in PSE 9. Thank you!

    To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

  6. #6
    View bdd's Gallery
    Join Date
    Mar 2010
    Location
    South Florida
    Posts
    560
    You did a fantabulous job on this tut Dona, thank you for sharing with us!

    To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

    To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

    To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.













  7. #7
    Thanks so much for the tut. It's great

  8. #8
    Thanks for the tut!

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •